Fife纠偏-检验,MAGPOWR张力-控制,Tidland分切-卷取,MAXCESS国际集团,美塞斯产品,美塞斯中国,授权代理商厦门飞美泰贸易有限公司 Fife纠偏-检验,MAGPOWR张力-控制,Tidland分切-卷取,MAXCESS国际集团,美塞斯产品,美塞斯中国
首 页 公司介绍 行业方案 产品信息 服务和支持 热点新闻 招聘信息 留言板 联系我们



美塞斯产品家族 当前位置:首页 >> Fife产品首页 >> Kamberoller® 

MicroSymat Offset Pivot Guide

Mycrosysmat The MicroSymat is a super compact electromechanical guiding system designed specifically for narrow-web guiding applications. This single-roll offset pivot guide is available with two standard roller faces: 3.15" (80 mm), and 3.94" (100 mm), with diameters of 1.97”, 2.95” and 3.94” (50 mm, 75 mm and 100 mm). Maximum allowed tension is 22.5 lbf (100 N).

Depending on your needs and sensor(s) selected, the MicroSymat delivers precise, reliable operation in edge, center or line guide applications. A Servo-Center transducer provides automatic guide centering to speed the setup and threading process, resulting in minimum downtime and reduced waste.


Key Features:

  • Compact design for highly accurate guiding under tight space constraints.
  • Fully proportional for fast, accurate guiding.
  • Cantilevered mounting for quick and easy web insertion.
  • Very high frequency response.
  • Precise actuator and DC servomotor.
  • Durable construction for low maintenance and long-lasting reliability.
  • Servo-Center transducer speeds setup and threading.
  • All standard Fife sensors and processors can be used for edge, center or line guiding.

Additional Specifications:


Roller Diameter:
Minimum 1.97" (50 mm)
Maximum 3.94" (100 mm)


Maximum Correction:
±0.32" (8 mm)


Maximum Allowed Tension:
Up to 22.5 lbf (100 N)

[返回上一页]  [返回Fife产品主页]
版权所有© 2006-2013 厦门飞美泰自动化科技有限公司 地址:厦门市厦门火炬高新区火炬东路11号创业大厦711单元 邮编:361009
电话: (86)592-2107107 2051408 传真: (86)592-2107108 Email: 网址:http://www.phmattel.com
建议分辨率1024X768,IE6.0以上浏览器,以获得最佳效果。闽ICP备09031839号 技术支持:泽迅网络