Fife纠偏-检验,MAGPOWR张力-控制,Tidland分切-卷取,MAXCESS国际集团,美塞斯产品,美塞斯中国,授权代理商厦门飞美泰贸易有限公司 Fife纠偏-检验,MAGPOWR张力-控制,Tidland分切-卷取,MAXCESS国际集团,美塞斯产品,美塞斯中国
首 页 公司介绍 行业方案 产品信息 服务和支持 热点新闻 招聘信息 留言板 联系我们



美塞斯产品家族 当前位置:首页 >> Tidland产品首页 >> D4Differential Air Shaft 

Equalizer Series Core-lock Differential Shaft – Model D4

Control of finished roll quality is placed back in the hands of your machine operator with the Tidland Model D4 Core-Lock differential shaft. This core-lock differential shaft represents the latest technology for dust-free, superior quality differential winding at the slitter/winder station of any film, laminating, printing and coated products process line. The D4 has a unique, two-row, 12-ball, torque activated cartridge design that positively locks the core, insuring no dust is generated, while providing predictable and consistent tension control and high quality roll structure throughout the entire roll. Radial, pneumatic torque control insures equalized tension across any combination of roll widths and tension control down to 0.15 pli insures quality roll builds for even the most sensitive materials.

Key Features:

  • Highest quality roll build – With the torque activated, .875” (22.23 mm) wide, core-locking cartridge design roll quality is no longer dependent on core quality.
  • Easy use - No operator activation of shaft required at beginning or end of roll build – cartridges engage when wind starts and disengage when wind stops.
  • Roll wobble no longer an issue - Alternately staggered ball and cartridge design - .875” (22.22 mm) wide slit width capability. Roll wobble minimized with minimum of two rows of balls per core.
  • No dust - Pneumatic, frictional torque control against machined surface, not ID of core, eliminates dust generated during roll build and won’t damage printed material on core ID (where applicable).
  • Manual control not required! Radial, pneumatic pressure/torque control equalizes tension, offering a high degree of accuracy in tension equalization. Pressure/torque controlled through HMI at winding station.
  • Eliminate vibration – The D4 symmetrical design means that there is no inherent imbalance in shaft. Capable of 2300 fpm supported and 1500 fpm cantilevered without vibration.
  • Pressure control placed in the hands of the operators. 0–60 psi range of pressure control-based on machine/product requirements. Resistant to pressure/tension variation due to pressure spikes in machine/plant air supply to shaft.
  • High load carrying capacity
General Specifications:
Core-lock, internal slip, pneumatically controlled differential shaft
 Core ID Sizes:

3” to 6" (76 mm to 152 mm) Two-row, 12-ball, core-locking cartridges

[返回上一页]  [返回Tidland产品主页]
版权所有© 2006-2013 厦门飞美泰自动化科技有限公司 地址:厦门市厦门火炬高新区火炬东路11号创业大厦711单元 邮编:361009
电话: (86)592-2107107 2051408 传真: (86)592-2107108 Email: 网址:http://www.phmattel.com
建议分辨率1024X768,IE6.0以上浏览器,以获得最佳效果。闽ICP备09031839号 技术支持:泽迅网络