Fife纠偏-检验,MAGPOWR张力-控制,Tidland分切-卷取,MAXCESS国际集团,美塞斯产品,美塞斯中国,授权代理商厦门飞美泰贸易有限公司 Fife纠偏-检验,MAGPOWR张力-控制,Tidland分切-卷取,MAXCESS国际集团,美塞斯产品,美塞斯中国
首 页 公司介绍 行业方案 产品信息 服务和支持 热点新闻 招聘信息 留言板 联系我们



美塞斯产品家族 当前位置:首页 >> Fife产品首页 >> GAG-3 
GAG-3 Electromechanical Actuator

Got a demanding job with shiftable loads up to 2,240 lbs (1,016 kg)? Then try the rugged GAG-3 Actuator. It provides the extra thrust you need to handle even the most demanding jobs. The actuator utilizes a 2.0-Amp, 1,560 motor to deliver enough power for any application. This gear-driven actuator also features fast shifting speeds of 0.87 inch/sec (22 mm/sec), and standard actuator strokes ranging from 1â157; to 12â157; (25 to 305 mm) in 1â157; (25 mm) increments.

Ball screw and nut design provides low-friction, efficient operation, and eliminates the typical end-of-stroke sticking and/or the need for actuator limit switches. For use with Fife's CDP-01 or CSP-01 Processors, this actuator is widely used for steering guides, displacement guides, positioner assemblies, slaving, chasing applications, and unwind/rewind applications.


Key Features:

  • Gear-driven actuator with shiftable loads up to 2,240 lbs (1,016 kg).
  • Clean, electronic operation.
  • Durable construction for continuous-duty reliability.
  • Non sticking end of stroke design.
  • No limit switches required.
  • Compatible with all Fife automated guiding and positioning equipment.
  • Sized and configured to your requirements.

Additional Specifications:


Maximum Shiftable Load:
2,240 lbs (1,016 kg)
(using anti friction bearings)


Maximum Design Thrust:
224 lbf (996 N)


Maximum Shifting Speed:
0.87 inch/sec (22 mm/sec)

[返回上一页]  [返回Fife产品主页]
版权所有© 2006-2013 厦门飞美泰自动化科技有限公司 地址:厦门市厦门火炬高新区火炬东路11号创业大厦711单元 邮编:361009
电话: (86)592-2107107 2051408 传真: (86)592-2107108 Email: 网址:http://www.phmattel.com
建议分辨率1024X768,IE6.0以上浏览器,以获得最佳效果。闽ICP备09031839号 技术支持:泽迅网络