Fife纠偏-检验,MAGPOWR张力-控制,Tidland分切-卷取,MAXCESS国际集团,美塞斯产品,美塞斯中国,授权代理商厦门飞美泰贸易有限公司 Fife纠偏-检验,MAGPOWR张力-控制,Tidland分切-卷取,MAXCESS国际集团,美塞斯产品,美塞斯中国
首 页 公司介绍 行业方案 产品信息 服务和支持 热点新闻 招聘信息 留言板 联系我们



美塞斯产品家族 当前位置:首页 >> Fife产品首页 >> CDP-01 Controller 
CDP-01 Controller
CDP-01 There's so much flexibility in the CDP-01 controller. You'll find it within the control functions and throughout the system. The advanced setup features of this controller automatically determine and set guide polarity, guide point, and system gain. Built for demanding web guiding applications, this controller also provides the flexibility to add features as needed. Available for both electromechanical and electrohydraulic operations, the CDP-01 can be configured for line, edge, either edge, or center guiding applications. All Fife standard sensors can be used, whether you need infrared, ultrasonic, visible light, or feeler-palm. There are multidrive versions of the CDP-01 available, allowing one controller to control multiple actuators. Also available is the popular dual-loop version for moving-sensor center guiding systems, featuring both guide and sensor positioner control loops in one housing. The CDP-01 has the ability to remotely interface to a PLC with 6 remote control inputs and 2 alarm outputs (standard matrix). 

Key Features:

Advanced controller provides automatic setup features for fast, accurate operation.

  • Switchable 115/220 VAC 50/60 Hz operation.
  • Parallel interface for various functions: 6 inputs (remote controls), 2 outputs (alarms or indicators).
  • Automatically adjusts to connected Fife motor.
  • Built-in amplifier for transparent web detection with infrared sensors.
  • Automatic Sensor Control - a loss of a sensor signal, a web break, tear-out, end of roll, etc., will automatically put system into manual mode.
  • Electrostatic discharge protection.
  • CE Compliant.

Additional Specifications:

Voltage Requirements:

90-120 VAC 50/60 Hz
180-240 VAC 50/60 Hz

210 VA

2.5 Amp slow blow (5 x 20 mm)

AC Current:
2 Amp maximum

Maximum Motor Output:
80 watts (2.6 A at 30 V/3.5 A at 22 V)

Protection Class:
IP 40


  • Servo-Center - Allows guide structure to be positioned in the center of travel, providing faster setup and threading.
  • Remote Guide Point Control -Allows the position of web to be controlled from up to 98' (30 m) away.
  • Remote Operator Control Panel - Allows remote control of mode, left-right jog buttons, and the sensor select.




[返回上一页]  [返回Fife产品主页]
版权所有© 2006-2013 厦门飞美泰自动化科技有限公司 地址:厦门市厦门火炬高新区火炬东路11号创业大厦711单元 邮编:361009
电话: (86)592-2107107 2051408 传真: (86)592-2107108 Email: 网址:http://www.phmattel.com
建议分辨率1024X768,IE6.0以上浏览器,以获得最佳效果。闽ICP备09031839号 技术支持:泽迅网络