Fife纠偏-检验,MAGPOWR张力-控制,Tidland分切-卷取,MAXCESS国际集团,美塞斯产品,美塞斯中国,授权代理商厦门飞美泰贸易有限公司 Fife纠偏-检验,MAGPOWR张力-控制,Tidland分切-卷取,MAXCESS国际集团,美塞斯产品,美塞斯中国
首 页 公司介绍 行业方案 产品信息 服务和支持 热点新闻 招聘信息 留言板 联系我们
 

纠偏-检验



张力-控制



分切-卷取
美塞斯产品家族 当前位置:首页 >> Tidland产品首页 >> D3 Differential Air Shaft 

D3 Differential Air Shaft

Tidland D3 Differential Air Shaft
Are you tired of using tools and handling spacers, core stop setups to get your cores into position when running multiple cores? Want fewer runs for your master roll through your slitter? Well now you can use the Equalizer Model D3 air shaft and run a variety of different roll widths with adjustable pressure all along the length at the same time! The Equalizer D3 is guaranteed to provide core positioning with adjustable air pressure without spacers or core stop setup. It’s designed for duplex center or surface winders for multiple roll tension equalization.

How the Equalizer Model D3 works:

When not covered by the core, tension elements lock mechanically to secure core position through the entire run. D3 differential shafts require no tools for core stops, no core stop positioning. 

You get performance. By implementing the Equalizer Model D3 air shaft into your production line, you will immediately see increased performance by being able to quickly utilize the same shaft for varying roll sizes with differing tension requirements on the same run. Bottom line – your production will increase and you will be amazed by your roll quality. Try this new innovation and see how far you can go by saying “NO” to tools, spacers, core shifts and waiting for core position set-up. 

  • Click here to view a video explaining the benefits of the Equalizer Model D3  GO>>

Key Features:

  • Quick and easy setup – Automatically locks core position without spacers or core stops to set up.
  • Better quality rolls - Automatic positive mechanical core stop feature guarantees core positioning.
  • Flexibility - Run multiple slit widths on the same shaft.
  • Practically dust-free - Tension elements do not cut into or create wear on the core.
  • Quick and easy maintenance - Modular tension cartridge feature allows easy access
General Specifications:
 Application:
Duplex Center or Surface Winding

 Core ID Size:
3” to 16"
(76 mm to 406 mm)


[返回上一页]  [返回Tidland产品主页]
版权所有© 2006-2013 厦门飞美泰自动化科技有限公司 地址:厦门市厦门火炬高新区火炬东路11号创业大厦711单元 邮编:361009
电话: (86)592-2107107 2051408 传真: (86)592-2107108 Email: feimeitai@163.com 网址:http://www.phmattel.comhttp://www.feimeitai.com
建议分辨率1024X768,IE6.0以上浏览器,以获得最佳效果。闽ICP备09031839号 技术支持:泽迅网络